|
|
Video Source |
[FrontPage Include Component] |
|
 |
|
|
|
|||||
|
NAVIGATOR: Back - Home > Adi > Services > Support > Manuals > Apas > Transform : |
|||||
|
|
|||||
| |||||||||||||||||||
|
Video Source
Categories
| Video Source This part of the documentation is related with the hardware setup of the Iomega Jaz Buz. We have not included the setup of other hardware vendors but the basic idea by Video Source configuration is the same but the front end to manipulating the setup is different. Video source The video source dialog is activated using the menu item Video Source in the Option menu.
Using the Video Source dialog it is possible to change various aspects of the video input signal. Video input is used to setup the connection of the video input i.e. where the video signal from either VCR or camcorder is provided. The Iomega Jaz Buz is capable of detecting the video standard supplied on the input. Clicking the Detect button adjusts the Video standard for the appropriate standard. If the video input is not set correctly the Detection process will not work. The sliders in the bottom of the dialog (Brightness, contrast, Saturation and Hue) is used to modify the image quality when capturing. The settings of these settings is kept after the Software module ended.
|
|
|
